La gamme FELSIC d'Exxelia se compose de condensateurs de grande taille offrant une forte densité énergétique. Plusieurs familles composent cette gamme pour répondre à différents besoins : forte densité d’énergétique, résistance à de très forts courants, longue durée de vie, etc.

Condensateurs Electrolytique Aluminium Bornes à vis FELSIC 105 TFRS

 Condensateurs > Electrolytique Aluminium > Bornes à vis - FELSIC 105 TFRS

Principales caractéristiques

  • Longue durée de vie
  • Fort courant ondulé
  • Forte puissance
  • Faible résistance série
  • Faible hauteur


  • Filtrage
  • Stockage d'énergie


Caractéristiques techniques


  • Aluminum


  • Minimum : 470 µF
  • Maximum : 68000 µF

Voltage DC

  • Minimum : 10 V
  • Maximum : 100 V

Voltage AC

  • Non supporté


  • Minimum : -55 °C
  • Maximum : 105 °C

Case sizes

  • 51x81 51x104 66x104 77x144 36x47 36x60,36x80 73x104


  • Screw


  • Aucune note particulière




83 110


40 040


60 384-4


Documents techniques

Modèles 3D

  • Pas de modèle


Q: Searching for a product with Large Capacitance ?

Aluminum electrolytic capacitors, also commonly known as just electrolytic capacitors, are a unique type of configuration that uses an electrolyte to achieve a capacitance that is much larger than other types of these devices. The electrolyte in question is usually either a gel or a liquid that itself contains a very high concentration of polarized ions. Polarization indicates that the voltage on the positive terminal is always larger than the similar voltage on the negative terminal of the capacitor.

One of the major benefits of these types of aluminum electrolytic capacitors is the aforementioned large capacitance. They do, however, have a number of disadvantages when compared to other types of capacitors. Aluminum electrolytic capacitors have a large leakage current when compared to capacitors of other types. Additional disadvantages include a limited lifetime, value tolerances and an equivalent resistance series.

Q: Why are Electrolyte Capacitors Forward Biased ?

For safety purposes, these types of capacitors need to be forward biased in their configuration. This is mainly due to the characteristics of the electrolyte that has been used in their construction. The positive terminal always needs to have a larger amount of voltage than that of the negative terminal. If the situation were reversed and the negative terminal suddenly had a higher voltage than the positive terminal (which is also referred to as reversing the voltage polarity), the aluminum material that is used as the dielectric could short circuit and become damaged. It could also overheat, which could cause a substantial leak. The capacitor could also vaporize, which could cause the entire enclosure to burst under the right circumstances. It is important to note, however, that this phenomenon is very rare.

Nous contacter