Les gammes Exxelia de condensateurs tantale solide avec des cathodes MnO2 sont disponibles dans un boîtier métallique hermétique ou dans un boîtier plastique moulé, avec des terminaisons filaires radiales ou axiales et en version pour montage en surface.

Condensateurs Tantale Solide MnO2 CTS 27

 Condensateurs > Tantale > Solide MnO2 - CTS 27

Principales caractéristiques

Applications

Marchés

Caractéristiques techniques

Dielectric

  • Solid Tantalum MnO2

Capacitance

  • Minimum : 0,1 µF
  • Maximum : 330 µF

Voltage DC

  • Minimum : 6,3 V
  • Maximum : 50 V

Voltage AC

  • Non supporté

Temperature

  • Minimum : -55 °C
  • Maximum : 125 °C

Case sizes

  • Non disponible

Terminations

  • Radial

Notes

  • Aucune note particulière

Normes

Téléchargements

Modèles 3D

  • Pas de modèle

FAQ

Q: What are the Benefits of Tantalum Capacitors ?

These capacitors offer a very high charge per unit of volume, a long lifetime and a high reliability. They are used in consumer goods and more specialized niches including space vehicles, aircraft electronics, weapons and rail transport. Exxelia develops both solid and wet tantalum capacitors.

A tantalum capacitor is a specific type of electrolytic capacitor. It is made from a metal called tantalum, which is where it gets its name. Tantalum acts as an anode. The capacitor itself is covered in a thin layer of oxide, which allows it to act as the dielectric. It is surrounded by a conductive cathode. One of the major benefits of tantalum capacitors is that their design allows for a very thin layer of dielectric, which allows for higher capacitance than other types of capacitors made from different types of materials. These types of capacitors are generally polarized, which means that in practice they can only be connected to a direct current power supply that has been designed while observing the appropriate terminal polarity. They have excellent stability over time and superior frequency characteristics when compared to different types of similar capacitors that are made from different materials.

Q: Mn02 vs Polymer Tantalum ?

A key characteristic of the tantalum capacitor with Mn02 cathode is its failure mode, which could be potentially dangerous under the right conditions. In the event of a voltage spike, if the circumstances align just right it could start a chemical reaction would could produce heat, smoke and even flame. The potential for dangerous situations is very limited due to the presence of some types of fail safes and other precautions that are taken during the construction of tantalum capacitors.

Tha being said, the use of Tantalum capacitors with polymer cathode is the perfect solution to completly cross this failure mode off your list. Polymer is free from O2, which makes ignition impossible.

Nous contacter