Exxelia MIL Wet Tantalum Capacitors M39006/22 now qualified to Level P

Exxelia’s MIL 39006/22 equivalent to CLR79 series is now approved to P-level reliability (0,1% / 1,000 h) for voltage ranges from 6V to 125V with a capacitance value ranging from 1,7µF to 1200µF. Available in T1, T2, T3 and T4 case sizes, these products are housed in a hermetically sealed Tantalum c...


Exxelia MIL Wet Tantalum Capacitors M39006/22 now qualified to Level P

June 24th, 2019 – Paris, France – Exxelia, a leading global designer and manufacturer of high-rel passive components and sub-systems dedicated to harsh environments, has received the P-Level qualification approval for its Wet Tantalum Capacitors MIL-PRF-39006/22.

Exxelia’s MIL 39006/22 equivalent to CLR79 series is now approved to P-level reliability (0,1% / 1,000 h) for voltage ranges from 6V to 125V with a capacitance value ranging from 1,7µF to 1200µF. Available in T1, T2, T3 and T4 case sizes, these products are housed in a hermetically sealed Tantalum case operating from -55°C to +125°C and are designed to withstand the most stringent environmental constraints.

       FEATURES:

  • Qualified for voltages up to 125V
  • Provides from 1200µF at 6V to 56µF at 125V
  • Highest Energy Density
  • Unlimited shelf life
  • Available with H vibration and shocks

MIL 39006/22 Level P are now available for order with a 14 weeks lead-time.

Published on 03 Jul 2019 by Rebecca Charles

Exxelia at IMS

Ultra low ESR, high RF power and high self-resonant frequency The NHB series is a complete range of MLCC based on NPO dielectric material providing a very high Self Resonant Frequency and limiting the parasite Parallel Resonant Frequencies. The series is available in 1111 size with capacitance ranging from 0. 3pF to 100pF. NHB series offers excellent performance for RF power applications at high temperature up to 175°C and at 500 VDC. The lowest ESR is obtained by combining highly conductive metal electrodes and proprietary of new NPO low loss rugged dielectrics. NHB series particularly fits for high power and high frequency applications such as: cellular base station equipment, broadband wireless service, point to point / multipoint radios and broadcasting equipment. Typical circuit applications: impedance matching, bypass, feedback, tuning, coupling and DC blocking. 100% invar tuning screws with self-locking system   Invar-36 is a unique Iron-Nickel alloy (64 % Fe / 36 % Ni) sought-after for its very low coefficient of thermal expansion. With 1.1 ppm. K–1 between 0°C and 100°C, Invar-36 is about 17 times more stable than Brass which is the most traditional and common alloy Tuning Elements are made of. The working temperature range in Space is so wide that this property becomes essential for a reliable and stable cavity filter tuning. Self-locking system is a technology commonly used on Tuning Element made of Brass or other soft “easy-to-machine” alloys but is innovative and pretty advanced when applied to hard and tough Invar 36. The design consists of two threaded segments separated by two parallel slots. After cutting both parallel slots, the rotor is compressed in its length in order to create a plastic deformation. Thus, an offset is induced between the two threaded segments which generates a constant tensile stress in the rotor from the moment threaded segments are screwed. High Q Factor Dielectric Resonators in large batches Dielectric resonators are designed to replace resonant cavities in microwave functions such as filters and oscillators. Exxelia with the support of ESA and CNES developed the E7000 series that provides a narrow bandwidth with smaller size. E7000 is Ba-Mg-Ta materials based that combines an ultra-high Q-factor and the possibility to get all the temperature coefficients upon request. E7000 features the high-performance requested for space use in the frequency range from 5 to 32 GHz, and guarantees up to Qxf > 250 000 at 10GHZ. Being one of the few manufacturers producing its own raw materials, Exxelia perfectly masters the production of dielectric resonators. Induced by the success of this new range, the company is now able to provide larger batches (up to 20kg of powder) of its E7000 series while keeping the exact same product properties, resulting in opportunities for cost-effective volume fabrication.

Inauguration EXXELIA Manufacturing site Morocco

We are thrilled to announce the inauguration of our brand new, modern, custom-built site in Morocco, a colossal 10,000 m2 industrial facility dedicated to electronic products. This state-of-the-art site is equipped with a 200 m2 clean room and is fully air-conditioned, setting a new standard in electronic manufacturing.     Features at a Glance: Industry 4.0 Orientation: Our modern plant follows the Hoshin method, embraces digital integration, and adopts lean principles. This ensures efficiency, precision, and adaptability in our manufacturing processes. Workplace Modernization: Our workshops are designed with the well-being of our teams in mind. We've modernized workstations, introduced new, more reliable, and productive equipment, creating clean, pleasant, and ergonomic environments. Green Surroundings: Easy access to a green environment enhances the overall workspace experience, promoting a positive atmosphere for innovation and collaboration.   Main Activities: Internal Subcontracting for French & US Sites: Our facility specializes in manufacturing a range of electronic components, including ceramic capacitors, electrolytic components, film products, stators, magnetic products, position sensors, and slip rings. Electronic Assembly for External Customers: We offer electronic assembly services for external customers, covering the winding of transformers and chokes, assembly of rotors and stators, wiring, and microwave micro-electronic assembly.   This step marks a significant expansion for Exxelia, solidifying our commitment to excellence and innovation in electronic manufacturing.