Exxelia at EDS 2022
Exxelia is pleased to exhibit at EDS 2022 in Euro Suite 305, Las Vegas, USA, from May 10 to 13, 2022. Discover how our innovative solutions could serve your offering.
Innovative new products at Electronica - Booth# B5 312 -
Felsic HV, long lifetime and high voltage screw terminal The Felsic HV family of aluminum electrolytic screw terminal capacitors provides great performances in energy density and ultra-long lifetime. For example products can withstand 8 000 hours at 105°C under high values of current which makes them the perfect choice to overcome railway constraints. The family also has one of the lowest ESR for aluminum capacitors, less than 10m0hms in most cases. Products are available for voltages from 160 to 450 Vdc, and offer capacitance values from 1500μF up to 47 000μF. Thus the family is a good compromise between reliability and compacity, with for example 47 000μF @ 160V in a 90x200mm volume. Cost-effective common-mode chokes qualified for aerospace Designed and qualified for aerospace, the TCM series is available in a through-hole package for horizontal and vertical mounting. TCM common-mode chokes are offered with inductances from 0.7 to 47mH under rated currents from 0.3A to 4A, and thoroughly tested by a dielectric withstanding strength at 1500VAC. Their excellent thermal properties allow the TCMs to operate without a hitch from -55°C up to +125°C, which, combined to the high mechanical resistance of the chosen materials (all meeting to UL94 V0 rating) make those products the perfect fit for aviation, defense and transportation industries. Ceramic capacitors based on the new C48X dielectric New range of high voltage ceramic capacitors based on brand new dielectric material C48X, combining most advantages of NPO and X7R dielectrics. Compared to X7R material, C48X dielectric allows to get the same capacitance values under working voltage with the unrivaled advantage of a very low dissipation factor (less than 5.10-4). Besides, it can also withstand very high dV/dt, up to 10kV/μs, which makes it the solution of choice for pulse and fast charge/discharge applications or firing units. Thus capacitors with C48X dielectric appear to be ideally suited for power applications where heat dissipation may be detrimental to performances and reliability. Ultra low ESR, high RF power and high self-resonant frequency The new NHB series is a complete range of MLCC based on NPO dielectric material providing a very high Self Resonant Frequency and limiting the parasite Parallel Resonant Frequencies. The series is available in 1111 size with capacitance ranging from 0.3pF to 100pF. NHB series offers excellent performance for RF power applications at high temperature up to 175°C and at 500 VDC. The lowest ESR is obtained by combining highly conductive metal electrodes and proprietary of new NPO low loss rugged dielectrics. NHB series particularly fits for high power and high frequency applications such as: cellular base station equipment, broadband wireless service, point to point / multipoint radios and broadcasting equipment.
Exxelia unveils new Innovative Aluminum Electrolytic Capacitor product line
FELSIC HC highest energy density of screw terminal aluminum electrolytic capacitor What if engineers could save 30% on room and weight, for a given energy storage function? This is now achievable with EXXELIA new FELSIC HC series of aluminum electrolytic screw terminal capacitors ! As Jérôme Tabourel, Exxelia Vice President of Marketing and Sales says: “Thanks to the use of improved materials, this new FELSIC family offers the highest energy density of the market, while still offering ultra-long life time”. These excellent characteristics allow to reduce the number of components used for the function, hence allowing room and weight savings of 30% on circuit board and greater reliability. Where to use FELSIC HC? These products are the perfect choice for Energy Storage and Power Industry equipment. SPECIFICATIONS: Capacitance from 100μF to 3 121 000μF Energy density up to 21 µF/cm3 for a custom design Voltages from 10V to 500V Life time of 8000 hours at 85°C Operating Temperature -40°C to +85°C