Condensateurs Electrolytique Aluminium Bornes à vis FELSIC HC
Principales caractéristiques
- Gain de place, de poids et de temps d'assembalge
- -30% sur le prix de la fonction
- Haute densité énergétique, Faible ESR
- Longue durée de vie 8000h @85°C
Applications
- Electronique de puissance : convertisseurs, onduleurs
- Alimentations à découpage
- Magnetisation, machines de soudure, flash
Caractéristiques techniques
Dielectric
- Aluminum
Capacitance
- Minimum : 100 µF
- Maximum : 3121000 µF
Voltage DC
- Minimum : 10 V
- Maximum : 500 V
Voltage AC
- Non supporté
Temperature
- Minimum : - 40 °C
- Maximum : + 85 °C
Case sizes
- 51x81 51x104 51x144 66x104 77x104 77x144 77x220 90x144 90x200 36x52 36x60 36x80 36x104 73x104 36x44 51x62 73x144 10
Terminations
- Screw
Notes
- Aucune note particulière
Normes
RoHS
NFC
83 110DIN
41 240IEC
60 384-4Téléchargements
Documents techniques
Modèles 3D
- Pas de modèle
FAQ
Q: Searching for a product with Large Capacitance ?
Aluminum electrolytic capacitors, also commonly known as just electrolytic capacitors, are a unique type of configuration that uses an electrolyte to achieve a capacitance that is much larger than other types of these devices. The electrolyte in question is usually either a gel or a liquid that itself contains a very high concentration of polarized ions. Polarization indicates that the voltage on the positive terminal is always larger than the similar voltage on the negative terminal of the capacitor.
One of the major benefits of these types of aluminum electrolytic capacitors is the aforementioned large capacitance. They do, however, have a number of disadvantages when compared to other types of capacitors. Aluminum electrolytic capacitors have a large leakage current when compared to capacitors of other types. Additional disadvantages include a limited lifetime, value tolerances and an equivalent resistance series.
Q: Why are Electrolyte Capacitors Forward Biased ?
For safety purposes, these types of capacitors need to be forward biased in their configuration. This is mainly due to the characteristics of the electrolyte that has been used in their construction. The positive terminal always needs to have a larger amount of voltage than that of the negative terminal. If the situation were reversed and the negative terminal suddenly had a higher voltage than the positive terminal (which is also referred to as reversing the voltage polarity), the aluminum material that is used as the dielectric could short circuit and become damaged. It could also overheat, which could cause a substantial leak. The capacitor could also vaporize, which could cause the entire enclosure to burst under the right circumstances. It is important to note, however, that this phenomenon is very rare.