Voir toutes les actualités

Film capacitor series keeps its cool even at 150°C

High-temp film capacitor, stays cool up to 150°C.

The Exxelia Dearborn 880P series of metalised Polyphenylene Sulfide (PPS) Film Capacitors is designed to keep cool when things get hot. With an operating temperature range of -55 to +150°C, they experience no derating for DC operations and none in AC operations up to +125°C.

This enables them to function at full capacity in extreme heat applications. The ability to operate at such high temperatures can eliminate the need for a cooling system within the design, thus reducing overall design time, weight and space.

PPS is a high-temperature, low-loss dielectric film used in the 880P series of wrap-and-fill capacitors. This allows them to feature superior electrical characteristics over an extremely wide temperature range and maintain excellent capacitance stability in one rugged, lightweight package. It performs consistently well in commercial applications such as in power supplies and in more demanding applications, such as in avionics, on a congested control or instrumentation panel.

The series features a capacitance range of 0.0047 to 10.0µF and voltage ratings from 50 to 400VDC with precision tolerances as low as ±¼% through ±10% yielding greater accuracy of capacitance. It is also a customisable unit with voltage maximums of 700 – 800VDC at 125°C maximum (higher voltages are available at reduced capacitance).

Made in the USA, the units are highly durable and capable of withstanding a five-pound pull force on lead axis. They are non-polar and demonstrate low loss factor, good voltage breakdown strength and high insulation resistance (low leak current) – and are completely stable over normal temperatures, voltages and frequency ranges. These characteristics allow the 880P series capacitors to deliver high performance in a variety of applications such as DC timing circuits, low- to high-frequency AC applications, and pulse or energy discharge uses.

Additionally, the package has axial leads with moisture-resistant, flame-retardant epoxy end seals and an outer tape covering for maximum performance.

Publié le 04 Sep 2017 par Marion Van de Graaf

Condensateurs céramique multicouches 0402 certifiés ESA QPL

Les gammes de condensateurs céramique multicouches basse tension pour montage en surface, CEC19 et CNC19, ont obtenu le statut QPL respectivement selon les critères de l’ESCC 3009/042 et 3009/043. Les tailles de boîtier 0402 certifiées QPL sont disponibles de 10V à 25V, permettant un gain d’espace substantiel et un meilleur rendement. Les condensateurs céramiques d’Exxelia sont désormais certifiés QPL pour les tailles de boîtier de 0402 à 2220, de 10V à 100V. Les condensateurs CEC sont réalisés avec le diélectrique NPO (type 1) reconnu pour sa très grande stabilité en tension et en température. Les CNC sont réalisés avec le diélectrique X7R (type2) qui offre la possibilité d’atteindre de fortes valeurs de capacité. Les versions avec des terminaisons polymères sont également certifiées QPL. Ces condensateurs chips polyvalents sont développés pour être utilisés dans une multitude d’applications nécessitant une fiabilité à toute épreuve : satellites, lanceurs, charges utiles, etc. CEC19 en bref : - Diélectrique NPO qui présente une très grande stabilité - Capacité maximale : 330pF à 10V, 120pF à 16V et 100pF à 25V, - Grande plage de température : -55°C à 125°C CNC19 en bref : - Diélectrique X7R qui offre une grande capacité - Valeurs de capacité élevées : de 68pF à 12nF à 10V, 8.2nF à 16V et 5.6nF à 25V - Grande plage de température : -55°C to 125°C

Exxelia à Space Tech Expo

ESA QPL Film Capacitors PM907S and PM948S are full series of Polyester Film Capacitors. PM907S products are suitable for voltages from 50V up to 1250V and offer capacitance values from 82nF up to 180μF. PM948S can be used from 50V up to 630V with capacitance values from 22nF up to 47μF. Both series can support extreme conditions with temperatures from -55°C to +125°C, and offer high energy density, low ESR & ESL and high RMS current. Film capacitor Series PM907S and PM948S are ESA QPL certified according to the ESCC Detail Specification No. 3006/025 and 3006/026   Smallest ESA QPL Ceramic Capacitor of the Market Exxelia ranges of low voltage MLCC for surface mounting, CEC19 and CNC19, have achieved the ESA Qualified Part List status under the criteria of the European Space Component Coordination’s (ESCC) 3009/042 and 3009/043 respectively. The  0402 size QPL-qualified parts are available from 10V to 25V, enabling substantial miniaturization and cost-saving. They are available either in the very stable NPO dielectric (type 1) or the high capacitance X7R (type 2). CEC and CNC series combine high capacitance values with high thermal and voltage stability. Versions with polymer terminations are also QPL-certified.   Miniature EMI filters for space application Exxelia’s gold-plated glass-sealed EMI filters SFC030 is the solution of choice to protect several embedded power supplies and data lines.  These small and reliable filters are available up to 5A @ 200V and 22nF.  Available in a Kovar package, the better alternative to steel for enhanced temperature cycling resistance, all Exxelia’s EMI filters for space are ESA qualified according to ESCC 3008. Thanks to this extensive experience in stringent ESA testing, Exxelia is able to adapt the tests of any filter according to any need (example: SMD 20A chip, 0pF capacitor value for an arrays of filters).
Voir toutes les actualités