High Frequency Transformers

Exxelia SVM reactors improve system performance by eliminating unwanted harmonics in equipment with non-linear loads.

Exxelia SVM designs inductors and chokes to block high-frequency ripple currents. Examples include filter inductors (5 mH, 15 A rms at 40 kHz; 10 mH, 10 A; dimensions specified). They also provide LCL filter inductors using rectangular Litz wire rated for high current (e.g., 100 µH, 360 A continuous, 510 A peak, 50 Hz–3.5 kHz).

Exxelia SVM develops fully custom magnetics, offering in-house tooling, MATLAB/FEMM modelling, special core designs, Litz wire constructions up to 350 A, and complete solutions from prototype to packaging.

Exxelia SVM develops SMPS transformers in multiple topologies (flyback, push–pull, forward converter, gate drive, pulse), supporting up to 500 kHz. They cover various core geometries (EE, EFD, ETD, PQ, RM, ER, Pot, Toroid…) with conductors such as enameled copper, triple-insulated wires, Litz, and twisted wires.

Exxelia SVM provides Hall-effect current transformers for high-speed AC and DC measurement up to 50 kHz.

Exxelia SVM designs high-frequency transformers operating up to 100 kHz and 500 kW. Custom units are also available, such as dry-type transformers (30 kVA at ~30 kHz, up to 50 kV DC) and high-voltage models (80 kVA, 20 kHz, ±25 kV outputs).

Exxelia SVM offers linear isolation transformers with high efficiency that comply with IEC and UL safety standards, e.g., a 3 kVA isolation transformer at 230 V / 50 Hz.

Yes. Exxelia SVM is qualified to the AS 9100 standard and can serves high-reliability markets such as defence, medical, EV, and communications, ensuring compliance with strict safety and regulatory standards.

Exxelia SVM is a company within the Exxelia Group with over 35 years of experience in the design, development, and manufacturing of coils and transformers, for both high-frequency and low-frequency applications. This extensive expertise allows Exxelia SVM to offer reliable technical solutions tailored to a wide range of demanding and often critical requirements.

For more than 12 years, Exxelia SVM has also specialized in the design and production of busbars with a variety of technologies and finishes, including:

• epoxy powder coating,

• PVC coating,

• laminated busbars,

• flexible busbars,

• resin-cast busbars,

• and surface finishes such as nickel plating, gold plating, silver plating, brazing, and tin plating.

These busbars are used in demanding environments, particularly in the healthcare and automotive industries, where high quality, reliability, and performance are essential.

Exxelia SVM’s mission is to address the complex and critical needs of design and manufacturing engineers in the electronics and electrical industries. The company supports its customers from design to mass production, offering full technical support to turn design concepts into manufacturable products.

With its long-standing experience in the design of transformers, inductors, and various electromagnetic components, Exxelia SVM continuously improves product quality. This know-how also enables productivity gains without compromising quality, ensuring consistent performance and competitive pricing for its customers.

Exxelia SVM is also characterized by strong vertical integration, which provides a high degree of flexibility and self-sufficiency in its manufacturing processes. This integration includes:

• the design of bobbins,

• the design and fabrication of injection molds,

• the manufacture of bobbins using both thermoset (phenolic) and thermoplastic materials, from standard to high-performance grades,

• an in-house tool room for precision machining of plastics and metals to meet exacting specifications, especially for rigid mounting systems,

• the design and production of customized packaging materials to meet specific transportation needs, whether by road, air, or sea.

With a monthly production capacity exceeding 10 million parts, Exxelia SVM is one of the largest manufacturers of coils and transformers in India, serving low-, mid-, and high-volume production demands.

Exxelia SVM’s components are used across a variety of sectors, including:

• power supply,

• lighting,

• medical electronics,

• electric vehicles,

• automotive,

• communications,

• and many other industrial electronic applications.

Exxelia SVM serves international customers in the United States, Israel, France, China, and India, demonstrating its ability to meet global technical, regulatory, and logistical standards across a wide range of industries.

Exxelia SVM provides a wide portfolio of magnetics components, including high-frequency transformers, SMPS transformers, linear power transformers, inductors & chokes, reactors, current transformers, and custom magnetics—covering both high- and low-frequency applications.

Exxelia SVM PRIVATE LIMITED is committed to satisfy its interested parties by providing quality products and on time delivery meeting customers’ and statutory and regulatory requirements. This could be achieved by involving all in the organization and continually improve the effectiveness of Quality Management Systems.

And Exxelia SVM is committed to protect, conserve and enhance aspects of the environment over which we have control or can influence.

These will be achieved through commitment on

• Strive to minimize waste and conservation through pollution prevention.
  Continually improve the effectiveness of Environmental Management System
• Meeting the compliance with Applicable Legal and Other Requirements.
• Conservation of resources like Oil, Water, Electrical energy, Packing material etc
• Instilling awareness to the employees for maintaining a pollution free environment
• Maintain open communication with public and other interested parties regarding Environment, Health and Safety.

Exxelia SVM is an ISO 9001:2015, ISO 14001:2015 Certified Organization and we comply with all Statutory Laws and Regulations.

Our Quality and Production Engineers are certified as per IPC-WHMA-A-620C (Requirements and Acceptance for Cable and Wire Harness Assemblies), IPC J-STD-001 (Requirements for Soldered Electronic Assemblies) & IPC-A-610 (Acceptability of Electronic Assemblies), IPC-A-600 (Acceptability of Printed Boards)

Exxelia SVM products are recognized under UL Insulation Systems
UL File No: E251904

• Class 130 (B) coil and transformer insulation systems designated CIS.04, SIS-130
• Class 155 (F) electrical insulation systems designated SIS-155- 1

Compliance to Safety and Regulatory Standards

• IEC 60601-1, UL 60601, ES 60601-1:2005
• IEC 61558-2- 13, IEC 61558-2- 4
• UL 5085-1, UL5085-2

Reliability Standards
IEC62211 Level B (Vibration test, Drop test, Humidity test, Solder-ability test, Temperature cycle test, Continuous Vibration test)

ROHS, REACH and Packaging Regulations.

Exxelia SVM is the registered member in BOMcheck for Regulatory Compliance Declarations.

The Team at Exxelia SVM works closely with our Customers and Suppliers to establish the highest Quality Standards.

To convert your concepts in to reality in Magnetic Components. Exxelia SVM can play a significant role in your Product Design where Magnetics is a vital component; in simple words Exxelia SVM can be your Strategic Solution Provider for your Special Magnetic components.

Exxelia SVM Design and Technology group works as an extended arm of customers Innovation Team in understanding the Specification, Criticality and the time lines of the Project implementation.

Design Organization

• Electrical, Electronics, Mechanical (Bobbin, Clamps and brackets)
• Design and simulation Capability for Inductors, Transformers, Hall Effect Current Transformers, Actuators, Solenoids.
• Power Converters, Stabilizer for Medical Equipment’s.
• Design and Development for Molded , Laminated , Epoxy powder coated , Nickel& Golde plated, Silver Plated , Brazing&Tin Plated , Flexible busbars and other Press Components.

Knowledge, Expertise & Techniques

• The Team at Exxelia SVM can Engineer your ideas and convert them into End use Components
• MATLAB, FEMM Modelling and Thermal Simulation of Magnetic components
• Reliability of components evaluated using Thermal Cycle, Random Vibration Test and Packaging Drop Test for Shipping and Handling
• Load Test for High Current Inductors and Linear Power transformers to check the temperature rise at actual loading pattern

Support for End use and Application

• The Team at Exxelia SVM Interact with Customers and provide solutions for End use and Application

Functional test set up developed for Variable Frequency High power test bench to test the transformers and inductors
Topologies – Full Bridge, Half Bridge, Push-Pull, Forward with loading facility.

Flyback Transformer Testing Set up

• Frequency – Up to 133 kHz
• Rating - Up to 250VA

High frequency Transformer Testing set up

• Frequency – Up to 100 kHz
• Rating - Up to 25kVA

Waveforms:

Lab Facility as per UL Safety Requirements

• Partial Discharge Test up to 100kV AC
• Impulse Testing Facility upto 100kV DC (Both Lighting and Switching Impulse)
• Load Test up to 50kVA (50HZ operating frequency)
• Dielectric Strength Test both AC and DC
• Precision LCR Magnetic Analyzer for measuring Inductance, Capacitance and Resistance
• DC Bias Test up for Inductors
• Temperature Data Logger

Magnetics Manufacturing Facility

• Multi spindle CNC Winding Machines
• Automatic Test equipment’s (ATE)
• Copper Foil Winding Machines
• Vacuum Impregnation plant

Busbar Manufacturing Facility

• Automatic Pressure Gelation Machine ( Resin Cast)
• Amada CNC Turret Punching Machine
• Amada CNC Bending Machine
• AIDA Pneumatic Press for Blanking and forming
• CNC PET Film Cutting Machine
• Hot Press for Lamination
• Powder Coating Plant
• Plating Plant
• Resistance Brazing and Pressure Welding Setup
• PEM Nut and Stud insertion Machine.

Backward Integration

• Round Litz Wire up to 350A Current Rating
• Rectangular Type 8 Litz wire up to 350A Current Rating
• Press Components
• Bobbin manufacturing both Thermoset and Thermoplastic
• Sophisticated Tool room
• Lamination Stamping Facility
• Thermoforming Packaging Trays

Special Purpose Machines (SPM)
Builds special jigs, Fixtures, Machines to bring out Customized Products