Exxelia mutliways filters are available with up to 25 ways, pins or sockets, in a circular or a rectangular housing.

Multiways & Custom EMI-RFI Filters FLM

 Filters > EMI-RFI > Multiways & Custom - FLM

Main Features

  • D-SUB interface
  • ISO threaded interface
  • Custom interface

Typical Applications

  • Power supply
  • Data signal

Markets

Technical Characteristics

Current

  • Up to: 10 A

Voltage

  • Minimum : 25 V
  • Maximum : 200 V

Insertion Loss

  • Minimum : 0 dB
  • Maximum : 70 dB

Capacitance

  • Not supported

Temperature

  • Minimum : -55 °C
  • Maximum : 125 °C

Dimensions (OD)

Mounting

  • Bolt-in

Sealing

  • Glass & Resin

Notes

  • No special note

Related Standards

RoHS

Related Documents

Technical Papers

3D Models

  • No Model

Frequently Asked Questions

Related to this product

Q: How is a L Filter Built?

Two elements: a feedthrough capacitor from line to ground, and an inductor connected in series with it between the input and output terminals.

The capacitive element can be placed on either the line or load side of the filter, making it either a capacitive or inductive input. Its attenuation increases at 40 dB per decade from its cutoff frequency to at least that frequency where it exhibits a minimum attenuation of 70 dB. It maintains this level at higher frequencies. They are commonly referred to as L filters:

  • L1 indicates that the inductive element is on the end with the threaded mounting neck.
  • L2 indicates that the capacitive element is on the end with the threaded mounting neck. L-Only Filters or LL are used when the difference between line and load impedance is large.

The inductive element is best placed so that it faces the lower impedance.

Information request