Larger Batches of High Q-Factor Dielectric Resonators
Exxelia can now produce larger batches of its E7000 series for increased cost-effectiveness. Designed for high-end filters where Q-factor is critical, especially in space or military applications, the E7000 series of dielectric resonator features tremendous properties.
Dielectric resonators are designed to replace resonant cavities in microwave functions such as filters and oscillators. Exxelia with the support of ESA and CNES developed the E7000 series that provides a narrow bandwidth with smaller size. E7000 is Ba-Mg-Ta materials based that combines an ultra-high Q-factor and the possibility to get all the temperature coefficients upon request. E7000 features the high-performance requested for space use in the frequency range from 5 to 32 GHz, and guarantees up to Qxf > 250 000 at 10GHZ.
Being one of the few manufacturers producing its own raw materials, Exxelia perfectly masters the production of dielectric resonators. Induced by the success of this new range, the company is now able to provide larger batches (up to 20kg of powder) of its E7000 series while keeping the exact same product properties, resulting in opportunities for cost-effective volume fabrication.
Typical applications for the E7000 series: Satellite multiplexing filter devices, radio links for communication systems (LMDS), military radars.
ESA QPL Film capacitors
PM907S and PM948S are full series of Polyester Film Capacitors. PM907S products are suitable for voltages from 50V up to 1250V and offer capacitance values from 82nF up to 180μF. PM948S can be used with a voltages from 50V up to 630V with capacitance values from 22nF up to 47μF. Both series can support extreme conditions with temperatures from -55°C to +125°C, and offer high energy density, low ESR & ESL and high RMS current. Typical characteristics Self-healing properties Open circuit failure mode High reliability & quality High energy density Very light masse Low ESR & ESL
Low Voltage 0402 MLCCs now in ESA QPL
Exxelia ranges of low voltage MLCC for surface mounting, CEC19 and CNC19, have achieved the Qualified Part List (QPL) status under the criteria of the European Space Component Coordination’s (ESCC) 3009/042 and 3009/043 respectively. The case size 0402 QPL-qualified parts are available from 10V to 25V, enabling substantial miniaturization and cost-saving. Dielectrics are based either in the very stable NPO (type 1) or the high capacitance X7R (type 2). CEC and CNC series combine high capacitance values with high thermal and voltage stability. Versions with polymer terminations are also QPL-certified. These ranges of versatile chip capacitors are intended for use in a wide variety of aerospace applications requiring the highest level of reliability: satellites, launch vehicles, payloads, etc. CEC19 features: - very stable NPO dielectric - maximum capacitance values: 330pF in 10V, 120pF in 16V and 100pF in 25V, - large operating temperatures: -55°C to 125°C CNC19 features: - high capacitance X7R dielectric - high capacitance rating values: from 68pF to 12nF in 10V, 8.2nF in 16V and 5.6nF in 25V - large operating temperatures: -55°C to 125°C