Back to news

Film capacitor series keeps its cool even at 150°C

High-temp film capacitor, stays cool up to 150°C.

The Exxelia Dearborn 880P series of metalised Polyphenylene Sulfide (PPS) Film Capacitors is designed to keep cool when things get hot. With an operating temperature range of -55 to +150°C, they experience no derating for DC operations and none in AC operations up to +125°C.

This enables them to function at full capacity in extreme heat applications. The ability to operate at such high temperatures can eliminate the need for a cooling system within the design, thus reducing overall design time, weight and space.

PPS is a high-temperature, low-loss dielectric film used in the 880P series of wrap-and-fill capacitors. This allows them to feature superior electrical characteristics over an extremely wide temperature range and maintain excellent capacitance stability in one rugged, lightweight package. It performs consistently well in commercial applications such as in power supplies and in more demanding applications, such as in avionics, on a congested control or instrumentation panel.

The series features a capacitance range of 0.0047 to 10.0µF and voltage ratings from 50 to 400VDC with precision tolerances as low as ±¼% through ±10% yielding greater accuracy of capacitance. It is also a customisable unit with voltage maximums of 700 – 800VDC at 125°C maximum (higher voltages are available at reduced capacitance).

Made in the USA, the units are highly durable and capable of withstanding a five-pound pull force on lead axis. They are non-polar and demonstrate low loss factor, good voltage breakdown strength and high insulation resistance (low leak current) – and are completely stable over normal temperatures, voltages and frequency ranges. These characteristics allow the 880P series capacitors to deliver high performance in a variety of applications such as DC timing circuits, low- to high-frequency AC applications, and pulse or energy discharge uses.

Additionally, the package has axial leads with moisture-resistant, flame-retardant epoxy end seals and an outer tape covering for maximum performance.

Published on 04 Sep 2017 by Marion Van de Graaf

Exxelia & Ariane 6

Several of our ESA QPL certified components such as our CCM and SESI ranges are notably on board, as well as two very special custom designed film capacitors   In January 2022, the upper and lower stages of Ariane 6 have arrived on the launch complex of the Guiana Space Center.     ➡ More informations on products : CCM 20 CCM 25 SESI 9.1 WR SESI 15 SR

Exxelia Ohmcraft High Voltage Chip Dividers Enable Design Flexibility for Manufacturers of Semiconductor Equipment

 Exxelia Ohmcraft High Voltage Chip Dividers Enable Design Flexibility for Manufacturers of Semiconductor Equipment   ROCHESTER, N.Y., September 17, 2021—Microchips—also known as semiconductors—are critical to the function of everyday technologies like mobile phones, computers, radios, and televisions. To finetune the outputs of their main power supply, manufacturers of semiconductor production equipment have leveraged custom resistors from Exxelia Ohmcraft for more than 25 years for their high precision, high voltage and stability.   Exxelia Ohmcraft’s custom surface mount resistors and dividers offer semiconductor equipment engineers with maximum design flexibility in the smallest footprint, as they have the ability to specify both the resistance value of a surface mount divider and the divider ratio. This allows engineers to produce the necessary voltage and current required to create the highest-quality end products.   “Traditionally, high-voltage dividers are made using two different resistors, but our high voltage chip dividers integrate them into one part,” said Eric Van Wormer, Vice President of Exxelia Ohmcraft. “We always work closely with our customers to ensure that we meet the specific design requirements necessary to create their quality technologies.”   Exxelia Ohmcraft’s technology utilizes the proprietary Micropen electronic printing system to “print” precise, narrow, serpentine lines with resistive ink on a ceramic substrate, producing higher performance resistors over a wider range of values on a smaller surface area than is possible with conventional film resistor technology.   # # #   About Exxelia Ohmcraft Exxelia Ohmcraft’s thick-film, surface mount resistors are engineered to meet application-specific needs. Our proprietary Micropen printing technology is the foundation for Exxelia Ohmcraft’s family of resistor products. Exxelia Ohmcraft’s precision leaded resistors are manufactured with our patented Micropen technology to create a unique serpentine design that withstands voltages up to 100kV and provides an unmatched level of performance and stability. For more information, visit Ohmcraft.com.   About Exxelia Exxelia is a leading global designer and manufacturer of high-performance passive components and subsystems. Exxelia’s wide products portfolio includes film, tantalum, ceramic and electrolytic capacitors, inductors, transformers, microwave components, position sensors, slip rings and high-precision mechanical parts. Recognized worldwide for its advanced design and technical expertise, Exxelia develops both “catalog” and “custom” products exclusively serving high-reliability markets such as aerospace, defense, medical, transportation, telecommunication infrastructure and advance industrial applications. Additional information can be found at https://exxelia.com.
Back to news