Multiways & Custom EMI-RFI Filters FPM
Technical Characteristics
Current
- Up to: 10 A
Voltage
- Minimum : 25 V
- Maximum : 200 V
Insertion Loss
- Minimum : 0 dB
- Maximum : 70 dB
Capacitance
- Not supported
Temperature
- Minimum : -55 °C
- Maximum : 125 °C
Dimensions (OD)
Mounting
- Bolt-in
Sealing
- Glass & Resin
Notes
- No special note
Related Standards
RoHS
Related Documents
Technical Papers
3D Models
- No Model
Frequently Asked Questions
Related to this product
Q: How is a Pi Filter Built?
A three-section filter consisting of two feedthrough capacitors to ground with a series inductor between them. The Pi filter is usually symmetrical, as are all the Pi filters in this catalog, but circumstances sometimes warrant use of asymmetrical Pi circuits. A Pi filter has attenuation characteristics that increase at 60 dB per decade from its cutoff frequency to at least that frequency where it exhibits a minimum attenuation of 80 dB. It maintains this level at higher frequencies.
Pi-Only Filters are the choice when high levels of attenuation are required and both the input & output impedances are similar.